Tuam Tshoj Tsawg tus nqi Txhaj tshuaj molding tshuab tsum

Blog

» Blog

Yuav ua li cas rau nruab ib lub yas pwm rau lub tshuab txhaj tshuaj?

Lub Ib Hlis 16, 2023

Pwm installation thiab uninstallation plays lub luag haujlwm tseem ceeb hauv kev txhaj tshuaj molding. Yog li ntawm no yog qee cov ntsiab lus tseem ceeb uas peb yuav tsum tau them sai sai rau thaum nruab cov pwm yas.

txhaj tshuaj pwm

txhaj tshuaj pwm

Thawj: Kev npaj cov pwm installation

1) Xyuas seb cov khoom puas tau ci, yog tsis yog, nws yuav tsum tau ci thaum xub thawj.

2) Check whether there is available machine, if the machine size and the ejection is suitable, thiab seb puas muaj cov haujlwm tshwj xeeb uas yuav tsum tau muaj.

3) Xyuas seb lub pwm yog npaj txhij, yog tias yog, tus neeg teb xov tooj yuav tsum tau tshaj tawm tam sim ntawd thiab tos rau daim ntawv ceeb toom.

4) Tom qab peb lub ntsiab lus saum toj no yog npaj txhij, thiab tom qab ntawd npaj cov cuab yeej, cov kav dej thiab cov khoom siv sib thooj.

Thib ob: Cov kauj ruam ntawm cov pwm installation

1) Move the mold to the front of the corresponding machine and place it firmly, ntsia hlau rau ntawm lub nplhaib lifting thiab paub meej tias txoj hauj lwm thimble.

2) Nqa cov pwm tsis tu ncua, slowly put it into the machine, and align the positioning ring of the machine and the mold.

3) Kaw lub pwm maj mam thiab nruj.

4) Tighten lub pwm nrog lub phaj siab, maj mam loosen thiab tshem tawm lub crane, thiab ces muab lub palladium tawm dua.

5) Tsa lub siab, nruj nreem ntsia hlau dua thiab kho lub nozzle.

6) Tshawb xyuas seb puas muaj qhov txawv txav ntawm cov pwm thiab paub meej tias cov cuab yeej xav tau ua ntej qhib pwm, thiab tom qab ntawd maj mam molding tom qab kuaj xyuas.

7) Txheeb xyuas cov pwm dua rau qhov txawv txav tom qab qhib pwm.

8) Find relevant personnel to connect with special auxiliary equipment and debug the machine.

9) Txhim kho cov cuab yeej pabcuam raws li kev xav tau, xws li: dej, txias khiav, lwm yam., thiab xyuas seb cov cuab yeej pabcuam no puas zoo li qub.

10) Ready to turn on the machine.

Peb:Kev npaj rau pwm uninstallation

1) Stop the injection, tshem tawm cov khoom seem ntawm cov ntsia hlau, thiab ntxuav cov ntsia hlau nrog cov khoom PP.

2) Tshem tawm cov dej sib txuas: ordinary water and water in the mold temperature machine.

3) Npaj cov pwm uas tsis muaj cov khoom siv thiab cov khoom siv sib xws: thoob, phom cua, anti-xeb roj, nqa lub nplhaib, crane, lwm yam.

4) Nrhiav lub tuam tsev tsim nyog tshem tawm cov cuab yeej ua ntej pwm uninstallation.

Yog tias koj muaj lus nug txog txhaj tshuaj pwm ,plz xav tias dawb nug FLYSE team,peb yuav muab kev pabcuam zoo tshaj rau koj!

CATEGORY THIAB TAGS:
Blog

Tej zaum koj kuj nyiam thiab

Kev pabcuam