In 2025, the global market value of pet injection molding machines is expected to reach US$22.45 billion, with a compound growth rate of 3.5%. According to the recent development of grand view research institutes—, by 2025, the global market value of pet injection molding machines is expected to reach US$22.45 billion, with a compound growth rate of 3.5%.
Main market driving forces The growing demand for lightweight, complex automobiles and electronic components will further promote the market demand for pet injection molding machines. Continuously improving industrialization, technology — and infrastructure growth will all become the driving force for the growth of demand for pet injection molding machines.
PET injection molding machine can be used for packaging of fragile and complex products, such as electronic products and mobile phones. The growing market demand for these products will promote the growth of the pet injection molding machine market. In the next few years, how much is a pet injection molding machine, and the mass production of automobiles, consumer goods, and electronics industries will further — the global market demand for pet injection molding machines.
In terms of end use, the market value of the automotive industry in 2017 was US$4.97 billion, and it is expected to record substantial growth in the next few years. PET injection molding machines are widely used in the automotive industry and can be used to produce complex and demanding automotive parts, such as interior and exterior accessories, electronic components, engine room components, etcThe .
pet injection molding machine is widely used in the consumer goods industry to manufacture personal hygiene care products, household products, cosmetics and daily convenience products. Ten rules for the installation of pet injection molding machine and manipulator!
In the current period when traditional manufacturing enterprises are upgrading and transforming in the direction of industrial automation and industrial robots on a large scale, the degree of automation in all walks of life has become higher and higher. Modern processing workshops are basically equipped with manipulators to improve production efficiency, and complete difficult or dangerous tasks. Then use the manipulator to sit back and relax —?
Дар асл, during the installation of the manipulator, due to the incorrect operation of the workers, the manipulator often has some failures of one kind or another. Баъдӣ, based on years of equipment installation experience, I will share with you the ten rules for the installation and cooperation of the manipulator and the pet injection molding machine:
1 The installation direction of the manipulators of two adjacent pet injection molding machines should be clear. 2 All actions and movements do not hinder the opening and closing of the safety door of the pet injection molding machine.3 All linear, rotating and other actions of the manipulator can be set on-site, and can be set within a certain error range. Once the error exceeds the set value, it will alarm and stop the action, and display its fault information on the touch screen .
When the 4pet injection molding machine or manipulator fails, the pet injection molding machine and the manipulator will interlock. Яъне, when the robot fails, the pet injection molding machine will stop operating; when the pet injection molding machine fails, the robot will also stop operating.
5 The arm has an anti-collision function: When a misoperation occurs, the program is equipped with an automatic anti-collision function, which can automatically judge and stop the action according to the torque of the motor, which can cause loss.
6 The action of the manipulator and the pet injection molding machine are the same, яъне, there will be no collision or interference with the pet injection molding machine, and the production cycle of the pet injection molding machine will not be excessively prolonged due to the action of the manipulator.
7 When the pet injection molding machine is down (fault shutdown, normal shutdown, mold replacement, equipment maintenance, ва ғайра), the manipulator can be manually placed in a safe position or other — position; it will not hinder mold replacement and equipment maintenance operations.
8 When the manipulator fails (such as not —, the product has not been taken out, the product has fallen, ва ғайра), it will immediately alarm and stop and display the fault on the touch screen, which is convenient for quick troubleshooting.
9 Some products require the robot to include a release agent spray system. The spray release agent can be accurately sprayed to the cavity after the mold is opened (the nozzle angle is adjustable), and the dosage can be adjusted, and the spray frequency can be set.
10 Яъне, all parameters and data settings can be set and modified through the computer, and then downloaded to the manipulator system for execution, or the parameters and data can be set directly on the manipulator. The basic method of repairing pet injection molding machine, pet injection molding machine, must not forget the critical moment!
The maintenance work of pet injection molding machine is the judgment of the fault and the treatment of the fault. It involves a wide range of knowledge, a large degree of complexity, and has a certain degree of —. It is necessary to have basic knowledge of mechanical equipment maintenance and basic knowledge of hydraulic maintenance, petpet injection molding machine manufacturers, and basic knowledge of electrical maintenance.
Дар асл, the maintenance of pet injection molding machine is difficult, but it is a process of continuous learning and enterprising. As long as you master the basic working principle of pet injection molding machine,The pet injection molding machine masters the basic working methods. Regardless of the various models, they can explore a set of maintenance procedures to operate normally with the pet injection molding machine. Maintenance—
First of all, you must understand and master the contents of the operating instructions of the pet injection molding machine, be familiar with and master the mechanical parts, circuits and oil circuits of the pet injection molding machine, and understand that the pet injection molding machine is working normally—the machinery, circuits and oil circuits Understand and master the inspection and maintenance methods of electrical components and hydraulic components.
Know the normal working state and the abnormal working state to avoid time-consuming misjudgment and wrong disassembly. Maintenance work must understand the operation method of the equipment and have some basic knowledge of injection molding, and be able to use the pet injection molding machine correctly. If you don’t know how to operate a pet injection molding machine, the maintenance work is very difficult, and it may be impossible to judge the fault.
The circuit boards and electrical components in the pet injection molding machine are affected by factors such as high temperature, environment, time, ва ғайра, the operating point of the components is shifted, and the aging degree of the components is within the normal range. Бинобар ин, debugging a pet injection molding machine is also one of the essential basic skills in maintenance work. Understanding the working procedures of pet injection molding machine, debugging the electronic circuit and hydraulic circuit of pet injection molding machine are very important links.
The maintenance work must be accurate, — and timely, and the contents in the instruction manual of each type of pet injection molding machine must be studied and mastered.In the general maintenance process, the maintenance idea is usually the circuit-the oil circuit-the action of the mechanical parts. The adjustment work is reversed. If the mechanical action and clamping pressure are insufficient, you can find the oil circuit and circuit.
If the circuit output is normal, adjust the oil circuit valve. The same is true for oil circuit maintenance, which must be adjusted and maintained according to the characteristics of the oil circuit and the oil pressure solenoid valve. Have the opportunity to frequently disassemble, clean, inspect, and install the solenoid valve. These treatments will cause a lot of trouble, but they are —pet injection molding machine-flyse injection molding technology-pet injection molding machine is provided by Ningbo flyse injection molding technology Co., Ltd.
Ningbo flyse injection molding technology Co., Ltd. (www.flyseimm.com) has poured a lot of enthusiasm and enthusiasm in the field of injection molding machines. Flyse injection molding technology has always been customer-centric, creating value for customers, and winning with quality and service In the market, I sincerely hope to cooperate with all sectors of society to create success and create together. Inquiries are welcome for related businesses.
Маводҳои қисмҳои дар тамос бо таҷҳизот ва ашёи хом ҳама аз пӯлоди зангногир сохта шудаанд мошини қолаби тазриқӣ Маводҳои қисмҳои дар тамос бо таҷҳизот ва ашёи хом ҳама аз пӯлоди зангногир сохта шудаанд, ва нархи мошини қолаби сӯзандоруро бидонед, шумо метавонед ба хидмати муштариёни онлайн клик кунед ё барои машварат занг занед! FLYSE Маводҳои қисмҳои дар тамос бо таҷҳизот ва ашёи хом ҳама аз пӯлоди зангногир сохта шудаанд: 8618958305290