Как да изберем линия за производство на тънкостенни кутии

With the rapid development of the thin-walled box индустрия, the original white disposable lunch box has been eliminated. Almost all restaurants have switched to PP fast food boxes. Разбира се, there are also many bosses who want to engage in this emerging industry and find it profitable. But since I just started, I don’t know where to start, what kind of lunch box mold is, and what equipment is needed to make it. Today I will tell you what equipment is needed to make this lunch box mold and how to do it.

• Need to invest: машина за леене под налягане, мухъл, chiller, feeder, air compressor
• 

In my previous article, I mentioned some production requirements for ultra-thin box injection molds. днес, I will mainly talk about which machines are needed at the beginning of the establishment of some ultra-thin box molds. Първо, you need to determine the 2-3 product models to be made. Например, 500ml/750ml/1000ml, the cover is designed as a universal style, which can save the cost of the mold, only need to invest 4 pairs of molds, относно 300,000 yuan (production requirements are designed according to the high-end mold design), the details of the molds are not detailed here. explained.

1. Then you need 1-2 high-speed injection molding machines. The initial output may not be particularly high. You can consider preparing a 200H injection molding machine first. Taiwan is even more. It is recommended to choose a high-speed injection molding machine, because the high-speed injection molding machine has a relatively fast pressure speed, which is conducive to the rapid production of products. Разбира се, there are many pseudo high-speed machines (modified machines) on the market, if the budget is limited, it can also be considered.

2.

Finally, you need to match the спомагателна машина. So what is the auxiliary machine? As the name suggests, it is the equipment for the auxiliary injection molding machine. Because this kind of product has a large output and cannot have dirty on the surface, the manipulator is necessary, and the domestic 3-axis manipulator can be used. НС. 2. Automatic feeding machine, used for plastic injection molding machine, there is an induction type on the market that can sense whether there is material in the hopper, automatic suction, 3. Air compressor, after the product is ejected, it needs air blowing 4. Chiller , The mold needs to be cooled, if there is only one machine, air cooling can be considered. 5. Finally, there is a crane, which needs to be installed when the factory is built, and the height is above 3.5 meters

Предпазни мерки

• The overall budget is around US$10w. You need to pay attention to safety during production, and it will not operate and cause equipment damage.

If you have more questions, please chat with me privately

Ако искате да знаете коя машина Вашият продукт е подходящ за, и знайте цената на машината за леене под налягане, можете да кликнете върху онлайн обслужването на клиенти или да се обадите за консултация! FLYSE гореща линия за обслужване: 8618958305290